Reliance Generator Transfer Switch - Single Circuit, 7500 Watt

Reliance Generator Transfer Switch - Single Circuit, 7500 Watt Review

Reliance Generator Transfer Switch - Single Circuit, 7500 Watt Feature

• L14-30 built-in power inlet

Ideal for control of farm buildings, irrigation systems, community wells, telecommunication substations, traffic signals and more! Weather-resistant cabinet is zinc-plated steel with powder-coat finish, gasket lined and lockable (padlock not included). Built-in power inlet can accommodate a generator cord with door closed and locked. Safe transfer switch gear keeps the generator isolated from the utility at all times. Outdoor surface mount. UL listed. 5-year limited warranty. U.S.A. Factory shipped. Amps: 30, Watts: 7,500, Volts: 125/250, UL Listed: Yes

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators Review

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators Feature

• 50 Amp power inlet box for use with Reliance transfer switches, panels
• Hardwire directly to hardware to eliminate extra wires
• Weatherproof design; zinc-plated construction prevents rust
• Removable face for easy wiring; push-in wire connection
• cUL 1008 listed; 5-year warrant

The Reliance Controls 50 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit works with generators working at 12,500 watts. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty. Raintight power inlet box is wired to your indoor load center and mounted to an exterior wall near where generator is running. Power cords are plugged from generator directly to power box, eliminating running power cords through an open window to load center. UL listed. U.S.A. Amps: 50, Watts: 12,500, Volts: 120/240, UL Listed: Yes

Go Power! TS-50 50 AMP TRANSFER SWITCH

Go Power! TS-50 50 AMP TRANSFER SWITCH Review

Go Power! TS-50 50 AMP TRANSFER SWITCH Feature

• Can handle 2 sources of 50 amps at one time.
• Made for use with inverter, shore power or generators.
• Delay switch for use with generators.
• Comes with knockouts for easy and professional installation.
• Double relay.

Go Power! 50 Amp Transfer Switch is used to hardwire inverters into a system where there is an alternative source of AC. This transfer switch is made to only allow one source of AC power to pass through it to the loads and can handle up to 50 Amps of service. This ensures that the inverter will not be damaged if the generator or utility power is hooked up while the inverter is running as well as well as contains all instructions.

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant)

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Review

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Feature

• Convenient, hands-free operation with no fueling. No manual start. No extension cords.
• Clean, smooth True Power Technology provides safe operation of sensitive electronics.
• Runs on natural gas or liquid propane.
• Does not include transfer switch
• CARB Compliant

Fully Automatic Operation When Paired With Nexus Smart Switch Generac OHVI Air-Coole...

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant)

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Review

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Feature

• Convenient, hands-free operation with no fueling, no manual start, and no extension cords
• Runs on either liquid propane (10,000 watts) or natural gas (9,000 watts)
• Clean, smooth True Power Technology provides safe operation of sensitive electronics
• Steel enclosure; 3-year warranty; transfer switch sold separately
• CARB Compliant

Fully Automatic Operation When Paired With Nexus Smart Switch Generac OHVI Air-Coole...

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022 Review

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022 Feature

• For 6-circuit switches
• Fits Item#s 100002 and 100022

Clear, tough acrylic swing-up cover prevents accidental contact with transfer switch toggles and protects from dust, dirt and water splashing. No drilling required; attaches to existing hardware. U.S.A. 5-year limited warranty. Circuits (qty.): 6, Application: Clear cover

PD52 240 VAC 50-Amp Automatic Transfer Switch

PD52 240 VAC 50-Amp Automatic Transfer Switch Review

PD52 240 VAC 50-Amp Automatic Transfer Switch Feature

• Heavy duty contactors prevent contact damage during high current transfer operation.
• Time delay circuit board ensures generator voltage is at a stable level before transfer occurs.
• Rugged, heavy-duty, screw-type wiring terminals ready to wire to contactor base. Ensure ease of wiring and prevents wiring errors.
• Screw-type wiring terminals ensure ease of wiring and prevent wiring errors.
• Easy to remove protective cover with wiring schematic mounted inside.

240 VAC 50-Amp Switch, AC Connectors: Screw-type wiring Terminals. Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time. Specifications -- Voltage: 240 VAC -- Amperage: 50 AMPS -- Dimensions: 4.5"H x 6.75"W x 7.25"L -- Weight: 7 lbs.