Reliance Generator Transfer Switch - Single Circuit, 7500 Watt

Reliance Generator Transfer Switch - Single Circuit, 7500 Watt Review

Reliance Generator Transfer Switch - Single Circuit, 7500 Watt Feature

• L14-30 built-in power inlet

Ideal for control of farm buildings, irrigation systems, community wells, telecommunication substations, traffic signals and more! Weather-resistant cabinet is zinc-plated steel with powder-coat finish, gasket lined and lockable (padlock not included). Built-in power inlet can accommodate a generator cord with door closed and locked. Safe transfer switch gear keeps the generator isolated from the utility at all times. Outdoor surface mount. UL listed. 5-year limited warranty. U.S.A. Factory shipped. Amps: 30, Watts: 7,500, Volts: 125/250, UL Listed: Yes

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators Review

Reliance Controls PB50 50 Amp Generator Power Cord Inlet Box For Up To 12,500 Watt Generators Feature

• 50 Amp power inlet box for use with Reliance transfer switches, panels
• Hardwire directly to hardware to eliminate extra wires
• Weatherproof design; zinc-plated construction prevents rust
• Removable face for easy wiring; push-in wire connection
• cUL 1008 listed; 5-year warrant

The Reliance Controls 50 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit works with generators working at 12,500 watts. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty. Raintight power inlet box is wired to your indoor load center and mounted to an exterior wall near where generator is running. Power cords are plugged from generator directly to power box, eliminating running power cords through an open window to load center. UL listed. U.S.A. Amps: 50, Watts: 12,500, Volts: 120/240, UL Listed: Yes

Go Power! TS-50 50 AMP TRANSFER SWITCH

Go Power! TS-50 50 AMP TRANSFER SWITCH Review

Go Power! TS-50 50 AMP TRANSFER SWITCH Feature

• Can handle 2 sources of 50 amps at one time.
• Made for use with inverter, shore power or generators.
• Delay switch for use with generators.
• Comes with knockouts for easy and professional installation.
• Double relay.

Go Power! 50 Amp Transfer Switch is used to hardwire inverters into a system where there is an alternative source of AC. This transfer switch is made to only allow one source of AC power to pass through it to the loads and can handle up to 50 Amps of service. This ensures that the inverter will not be damaged if the generator or utility power is hooked up while the inverter is running as well as well as contains all instructions.

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant)

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Review

Generac Guardian Series 5884 14,000 Watt Air Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Feature

• Convenient, hands-free operation with no fueling. No manual start. No extension cords.
• Clean, smooth True Power Technology provides safe operation of sensitive electronics.
• Runs on natural gas or liquid propane.
• Does not include transfer switch
• CARB Compliant

Fully Automatic Operation When Paired With Nexus Smart Switch Generac OHVI Air-Coole...

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant)

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Review

Generac Guardian Series 5883 10,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator Without Transfer Switch (CARB Compliant) Feature

• Convenient, hands-free operation with no fueling, no manual start, and no extension cords
• Runs on either liquid propane (10,000 watts) or natural gas (9,000 watts)
• Clean, smooth True Power Technology provides safe operation of sensitive electronics
• Steel enclosure; 3-year warranty; transfer switch sold separately
• CARB Compliant

Fully Automatic Operation When Paired With Nexus Smart Switch Generac OHVI Air-Coole...

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022 Review

Reliance Transfer Switch Clear Cover - For 6-Circuit Switches Item#s 100002 and 100022 Feature

• For 6-circuit switches
• Fits Item#s 100002 and 100022

Clear, tough acrylic swing-up cover prevents accidental contact with transfer switch toggles and protects from dust, dirt and water splashing. No drilling required; attaches to existing hardware. U.S.A. 5-year limited warranty. Circuits (qty.): 6, Application: Clear cover

PD52 240 VAC 50-Amp Automatic Transfer Switch

PD52 240 VAC 50-Amp Automatic Transfer Switch Review

PD52 240 VAC 50-Amp Automatic Transfer Switch Feature

• Heavy duty contactors prevent contact damage during high current transfer operation.
• Time delay circuit board ensures generator voltage is at a stable level before transfer occurs.
• Rugged, heavy-duty, screw-type wiring terminals ready to wire to contactor base. Ensure ease of wiring and prevents wiring errors.
• Screw-type wiring terminals ensure ease of wiring and prevent wiring errors.
• Easy to remove protective cover with wiring schematic mounted inside.

240 VAC 50-Amp Switch, AC Connectors: Screw-type wiring Terminals. Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time. Specifications -- Voltage: 240 VAC -- Amperage: 50 AMPS -- Dimensions: 4.5"H x 6.75"W x 7.25"L -- Weight: 7 lbs.

Generac RTS10EZA1 EZ Switch 10-circuit Load Center

Generac RTS10EZA1 EZ Switch 10-circuit Load Center Review

Generac RTS10EZA1 EZ Switch 10-circuit Load Center Feature

• Switch 10 circuit load center
• 30-feet prewired conduit for connecting the transfer switch to the external connection box
• 2-feet prewired conduit for moving circuits from the main panel to the transfer switch
• Prewired external connection box with a weatherproof conduit
• Switches are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint

The Generac EZ Switch with 10 circuit load center is ideal for homeowners who choose to backup selected circuits rather than the whole house. Pre-wired for the easiest installation on the market.

GenTran R3020 Power Center For Generators up to 7500 watts

GenTran R3020 Power Center For Generators up to 7500 watts Review

GenTran R3020 Power Center For Generators up to 7500 watts Feature

• Combines a transfer switch and service entry equipment into one for an easy way to distribute generator power to your entire load center
• Aluminum, weatherproof NEMA 3r-rated cabinet won't rust in elements; distributes power supply to outbuildings such as a barn, dock or detached garage
• Includes power inlet for easy generator cord connection; distributes power supply to outbuildings such as a barn, dock or detached garage
• Includes 12 extra spaces to feed other appliances, subpanels or for disconnects
• Compact, lightweight design is 18-inches in length by 18-inches in width by 4-inches in depth is easier to install than other "knife" type switches

R3020 Features: -Combines service entry and transfer equipment into one!.-Eliminates the expense and hassle of separate equipment and extra wiring..-Feed through lugs in the Power Center feed the main panel in the house, and extra spaces accommodate A/C disconnects and breakers to feed subpanels around your property..-Compact, Lightweight Design: Easy to install and wont take up a lot of space on the outside of a building..-Paintable!.-Flexible connections: Allow for hardwiring or plug-in generator connection.-Copper bus for increased reliability.-Handles inductive and resistive loads.-Max number of spaces for branch circuit breakers: 12.-NEMA 3R cabinet.-NEMA male power inlet type: L14-30. Specifications: -Designed and intended for any single phase 125/250 volt electrical applications..-Max Generator size: 7500 Watts.-Generator Main: 30 Amp.-Utility Main: 200 Amp. Warranty: -Warranty: Two years on parts and workmanship.

Steele Products SP-GT-750 Manual Transfer Switch With 6-Foot Power Cord

Steele Products SP-GT-750 Manual Transfer Switch With 6-Foot Power Cord Review

Steele Products SP-GT-750 Manual Transfer Switch With 6-Foot Power Cord Feature

• 2/20 ampere manual transfer switch
• 4/15 ampere with 6-foot power cord
• 6-foot 30 AMP 10AWG Extension cord
• NEMAL 14-30 Plug
• manual transfer

Manual transfer switch with 2/20 AMP, 4/15 AMP, 6-foot 30 AMP 10 AWG Extension cord, Nema 14-30 plug.

GenTran 3028 8-Circuit 30 Amp Transfer Switch For Up To 7500-Watt Generators

GenTran 3028 8-Circuit 30 Amp Transfer Switch For Up To 7500-Watt Generators Review

GenTran 3028 8-Circuit 30 Amp Transfer Switch For Up To 7500-Watt Generators Feature

• 30-amp 8-circuit transfer switch for use with up to 7,500-watt generator
• Powers up essential circuits using 5,000-watt generator during a power outage or emergency
• Accommodates 8 to 10 household circuits
• Can be expanded to up to 10 circuits using standard circuit breakers
• 2-year limited warranty

The GenTran 30 Amp 8-circuit transfer switch for up to 7,500-watt generators includes everything you'll need to install a generator transfer switch for safe, convenient portable generator hookup. Power up your essential circuits using a 5,000-watt generator (continuous watts) during a power outage or emergency. It accommodates 8-to-10 household circuits like your furnace blower (gas only), refrigerator and kitchen circuits, well pump, lights, and television. If your needs change, your installer can easily expand this transfer switch to up to ten circuits just by adding more circuit breakers. The enclosure can be surface mounted indoors, and allows hardwired or plug-in generator connections. Because it was designed with off-the-shelf circuit breakers you don't have to search high and low for replacements, and your installer can reconfigure the breaker combinations to suit your family's needs.

This transfer switch includes a L14-30 male power inlet and a dual watt meters to help you balance generator loads to prolong generator life. The kit comes with two 15 Amp 1-pole breakers, two 20 Amp 1-pole breakers, one 2-pole 20 Amp breaker, and one 2-pole 30 Amp breaker. A 60 Amp 2-pole main breaker is required in existing load center (not included). This kit comes with a 2-year limited warranty.

Reliance Controls PC3040 40-Feet 30-Amp L14-30 Generator Power Cord for Up to 7500-Watt Generators

Reliance Controls PC3040 40-Feet 30-Amp L14-30 Generator Power Cord for Up to 7500-Watt Generators Review

Reliance Controls PC3040 40-Feet 30-Amp L14-30 Generator Power Cord for Up to 7500-Watt Generators Feature

• 30-Amp power cord for use with reliance products
• For use with reliance transfer switches, transfer panels, and power inlet boxes
• 10-gauge 4 wire; nema L14-30 plug and connector ends
• UL listed
• 40-Feet in length; 5-year warranty

The Reliance Controls 40-foot 30 Amp power cord is designed for use with Reliance manual transfer switches, transfer panels, and power inlet boxes, for generators running at a maximum of 7500 watts. This heavy-duty power cord features 12-gauge 4-wire with NEM L14-20 plug and connector ends. It is UL listed and covered by a 5-year warranty. Reliance Controls 40' 30 Amp Generator Power Cord. Save on this heavy duty Power Cord. This 40' 30 Amp Generator Power Cord is designed for use with Reliance manual transfer switches, transfer panels and power inlet boxes. Lets you connect a generator and transfer switch with a single cord. More features: 40' flexible rubber cord with male and female molded ends; Cord holds up to 7,500 watts at 240 volts; Max. generator input: 30 amps at 125/250 VAC; NEMA configuration: L14-30; UL listed for outdoor use; Model PC3040; Order Today! Reliance Controls 40' 30 Amp Generator Power Cord

Generac Guardian Series 5872 14,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator With Transfer Switch (CARB Compliant)

Generac Guardian Series 5872 14,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator With Transfer Switch (CARB Compliant) Review

Generac Guardian Series 5872 14,000 Watt Air-Cooled Liquid Propane/Natural Gas Powered Standby Generator With Transfer Switch (CARB Compliant) Feature

• Convenient, hands-free operation with no fueling. No manual start. No extension cords. Runs on natural gas or liquid propane.
• Clean, smooth True Power Technology provides safe operation of sensitive electronics.
• Includes automatic transfer switch with 14 circuits protected (NEMA 1, indoor rated only)
• 14,000 Rated Watts
• CARB Compliant

14/13KW Air-Cooled Stand By Generator, Comes with Transfer Switch, Powers 14 Circuits Of Your Home Or Business Such As: Furnace, Water Heater, Kitchen, Including Refrigerator, Bathroom, Bedroom, Sump Pump, Family Room, True Power Technology Provides Safe Operation Of Sensitive Electronic Equipment & Appliances, Meets Ieee/Utility Standards, Easiest Installation With The Pre-Wired, Pre-Packaged 100A, Nema 1, Indoor Rated Only, Automatic Transfer Switch, OHVI Industrial Engine Designed Specifically For High Demand Generator Applications, Offers Full Pressure Lubrication To Ensure Instant, Total Lubrication To Vital Parts, Patented, Whisper Test Low-Speed Exercise Mode Offers Quietest Operation In Its Class, Can Be Powered By Propane Or Natural Gas.

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 3R Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001R

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 3R Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001R Review

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 3R Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001R Feature

• GenTran ovation series 200 Amp transfer switch NEMA 3r accommodates up to 38 household circuits and generators up to 30 kilowatt
• This model is ideal for installation in new construction as the main load center in a home or business
• Compatible with virtually any stationary generator up to 30 kilowatt; but can also be installed in retrofit application behind an existing load center
• NEMA 3r cabinet can be surface mounted outdoors
• Ul listed in US and Canada; Measures 4.2 inches in depth by 14.5 inches in width by 38 inches in height

ATS2001R Features: -Accommodates up to 38 household circuits.-UL Listed in US and Canada.-Made in USA.-Part Number: ATS2001R. Specifications: -Compatible with virtually any stationary generator up to 30 kW.-For generators up to 30 kW. Dimensions: -Dimensions: 14.5'' W x 38'' H x 4.25'' D.-Weight: 40 lbs.

Parallax Power Supply ATS301 30 Amp 120V Automatic Line/Generator Switch

Parallax Power Supply ATS301 30 Amp 120V Automatic Line/Generator Switch Review

Parallax Power Supply ATS301 30 Amp 120V Automatic Line/Generator Switch Feature

• Installs directly onto an existing Parallax 6300 series power plus
• Designed for aftermarket application
• Fits in smaller areas than ATS 100 and provides great cost efficiency

The Parallax Generator Switch series includes the model ATS (option "A") which installs directly onto an existing Parallax 6300 series Power Plus, a stand-alone 30 amp model ATS 30 and the stand-alone 50 amp ATS 100. The ATS 50 is designed for aftermarket application. It fits in smaller areas than ATS 100 and provides great cost efficiency. All models feature full-rated relays, AC wiring compartments, electrical lock-out to prevent damage or shock, and a built in 60 second delay for the generator to stabilize before the load is applied.

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 1 Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001D

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 1 Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001D Review

GenTran Ovation Series 200 Amp Utility/125 Amp Generator 38 Circuit NEMA 1 Automatic Transfer Switch For Up To 30,000 Watt Generators ATS2001D Feature

• GenTran ovation series 200 Amp transfer switch NEMA 1 accommodates up to 38 household circuits and generators up to 30 kilowatt
• This model is ideal for installation in new construction as the main load center in a home or business
• Compatible with virtually any stationary generator up to 30 kilowatt; but can also be installed in retrofit application behind an existing load center
• NEMA 1 cabinet can be flush or surface mounted indoors
• Ul listed in US and Canada; measures 14.3 inches in width by 39 inches in height by 3.93 inches in depth

ATS2001D Features: -Accommodates up to 38 household circuits.-UL Listed in US and Canada.-Made in USA.-Part Number: ATS2001D. Specifications: -Compatible with virtually any stationary generator up to 30 kW.-For generators up to 30 kW. Dimensions: -Dimensions: 14.3'' W x 39'' H x 3.93'' D.-Weight: 44 lbs.

PowerStation VLC2-0100 100 Amp Expandable Transfer Switch

PowerStation VLC2-0100 100 Amp Expandable Transfer Switch Review

PowerStation VLC2-0100 100 Amp Expandable Transfer Switch Feature

• Up to 24 circuits
• UL and CSA listed
• LED display for easy diagnosis
• Digitally programmable
• Two wire contact closure

The PowerStation 100 Amp Expandable Transfer Switch can be surface or flush mounted and expands up from 10 included to 24 circuits total. The PowerStation transfer switch has an easy-to-read LED display for instant diagnosis and is UL and CSA listed.